I have a Velocity 50 with a YS56SR and for a year and a half ive used the stock outrage exhaust pipe that came with my kit......and it ran with no issues....but i put on the Outrage EVO pipe on and today i took my first flight with it and my engine went POP i have no compression now so its must be blown...so my question is is it possible for a motor to blow up from just putting a new exhaust one with out changing the needle setting from the exhaust pipe that used to be on? i know the motor was in good shape cause a few weeks ago i just put in new bearing in the motor and everthing looked good and it ran great the last time i flew it with the old exhaust pipe..but like i said todays first run with the pipe cause the motor to blow up...
and my second question is are u suppossed to start with factory needle setting when putting on a new pipe? and maybe thats why it blew up........
before it blew up when i would try to get it into a hover the motor would die as if it was too rich....so i leaned it 3 clicks on the High needle.. tried another hover and seems to be aliitle better...then i richened it back up 3 clicks where i started at and got it into a hover..i was watchiing the TEMP on my dx8 and it was 107 F then the second the motor died i see the temp on motor go to 227 soo as the motor shut off so im kinda lost on to what really happened ....
and my second question is are u suppossed to start with factory needle setting when putting on a new pipe? and maybe thats why it blew up........
before it blew up when i would try to get it into a hover the motor would die as if it was too rich....so i leaned it 3 clicks on the High needle.. tried another hover and seems to be aliitle better...then i richened it back up 3 clicks where i started at and got it into a hover..i was watchiing the TEMP on my dx8 and it was 107 F then the second the motor died i see the temp on motor go to 227 soo as the motor shut off so im kinda lost on to what really happened ....