I converted my Blade SR with the Freestyle belt drive tail and after several crashes during setup testing, resorted to putting training gear on to prevent further disaster.
The tail on this contraption just will not lock in. You get it just about ready to lift off, give a slight rudder command to the left and thing does a pirouette. Tail authority seems too much left and not enough right. I have replaced the gyro, double checked all setup parameters and gyro direction and switch settings. The servo and pitch change mech. are centered as setup in rate mode. Gyro reaction is in the correct direction. I am just about at the end.
I really could use some help with this beast.:confused:
The tail on this contraption just will not lock in. You get it just about ready to lift off, give a slight rudder command to the left and thing does a pirouette. Tail authority seems too much left and not enough right. I have replaced the gyro, double checked all setup parameters and gyro direction and switch settings. The servo and pitch change mech. are centered as setup in rate mode. Gyro reaction is in the correct direction. I am just about at the end.
I really could use some help with this beast.:confused: