I am a Spektrum guy using the AR7100R Rev limiter receiver. I am intrigued by the S-Bus technology in conjuction with the GY 750 FBL unit. I am using a Hobbico 6.6v LiFe battery for receiver power which has a large connector wire for direct plug in to the AR7001R receiver. I am curious how you guys connect either a 6.6v Life battery or 7.4v lipo to the R6203SB receiver, as an example. I know that the Hobbico Life battery also has two smaller rx power cables too. So do you plug these two into the SB receiver and the 3rd port is used for the S-Bus connection, and then would this be a similar procedure using a 7.4v lipo receiver battery. I like the whole S-Bus technology but am confused how to provide HV power. Also the AR7100R has a fail safe switch. What do you all use for switches. Thanks for your help.
↧