Today I decided to upgrade my charging equipment so I could do my 6s 4000 packs a little quicker then I previously could, which was one batt at 1c...
So I bought an icharger 206b and an in house brand 250w power supply from my lhs
Here is a link
http://www.greathobbies.com/producti...od_id=TGHEW250
![]()
![]()
So it puts out 15v and 16.5 amps, which will hopefully allow me to charge two of my packs in parallel in around 38 minutes.
But I am wondering, with having dual outlets, does that mean each outlet can put out a max of 250 watts, or if using one only one can, or is it each outlet can only put out 8.25a and 125w and they need to be bridged?
The thing came with no instructions and the store is closed. I never found anything about power supplies in the icharger manual. I didn't think to ask about that while I was in the store.
I'm sure this is a very generic style power supply, any thoughts?
Thank you !
So I bought an icharger 206b and an in house brand 250w power supply from my lhs
Here is a link
http://www.greathobbies.com/producti...od_id=TGHEW250
So it puts out 15v and 16.5 amps, which will hopefully allow me to charge two of my packs in parallel in around 38 minutes.
But I am wondering, with having dual outlets, does that mean each outlet can put out a max of 250 watts, or if using one only one can, or is it each outlet can only put out 8.25a and 125w and they need to be bridged?
The thing came with no instructions and the store is closed. I never found anything about power supplies in the icharger manual. I didn't think to ask about that while I was in the store.
I'm sure this is a very generic style power supply, any thoughts?
Thank you !