Boca Bearing kit is now out
This kit upgrades the high RPM bearings with Boca Ceramics. It leaves out the bearings that do not need the same upgrades...like blade grips and washout. Also...2 TT bearings and the radial support for...
View Articleupdated now its not working
updated to version 3 now im trying to set up but it doesnt intialize,binds to the tx but when i go to set up for rx it flashes a but when i push the button all the lights start to flash help please
View ArticleFor Sale Trex 450 Pro with Mikado FBL head
I have an excellence condition 100% Align parts with Mikado FBL head Align 450M motor Align 35x esc 3 Hitec 5065MG digital servos 2 Voltz 35C 2200 mAh Brand new Thunder Power carbon blade Parts $280...
View ArticleHeli Jive heatsink question
Is a heat sink neccessary on a Jive 120HV or Heli Jive when using it on a 600 class machine? I think the answer is "no, it's not needed", but I have read a couple of posts by ppl stating unequivocally...
View ArticleNew flyer just picked up an MSR having a few problems.
I am new to this site and only been flying for two weeks or so. Picked up a blade 120sr a couple of weeks ago hoping it would be a good helicopter to learn with but found that even though it says it is...
View ArticleTurnigy typhoon 500h, 1800 kv
This is motor was used about a dozen times. Selling out parts for a t-rex 600 project. Perfect for 500 size heli. $25 shipped. PM for pictures.
View Article3mm CF rod tolerance for main shaft?
I bought one of Jim's fixtures for making main shafts, awesome product! I bought a length of "3mm" CF rod from my LHS but when I got home I noticed it was slightly larger than the stock main shaft. I...
View Articleyet another thread about extreme parts
Hello, I am new to this forum and there are countless threads on the HB V2, so forgive me if this has already been addressed. I am getting tired of the broken blade grips (just broke my last one and...
View ArticleNeed Setup Options
I'd like to get options on motor, pinion and ESC setups. I'll be running 12s on a Logo 6003D with 625 mains and 95 tails. Want to know what people think I run my Logo 600se on 12s so I want to keep the...
View Article700E Tail Wag when changing gryo.
What happens mechanically and electronically when you change the gyro gain? The reason I ask is because the tail wag started ONLY after I changed gryo settings. Once I made that change, no setting...
View ArticleIs 3600 RPM too much for the blade grip bolts on a flybarless 450 Pro?
Should I worry about the blade grip bolts on my 450 Pro FBL turning 3600 RPM at the beginning of my flights? I looked at them and swapped them which they seemed fine and I am using 12.9 grade on the...
View Articleelevator arm on 425
some one explain to me how the elevator arm is attached to the shaft, mine seems to have came loose and I can't figure out how it is mounted. is the shaft indexed to the arm there seems to be no set...
View ArticleTravel question...
Going to fly on a plane tomorrow... Was going to put my transmitter with my laptop as carryon so I can sim on my trip... Is this ok or will the security people have issue with it?
View ArticleClik here to view.
Align 450 Pro Flybarred Head Giveaway
I've received more help and support here at HF than I could have ever imagined. I'm honestly not sure my 3G 450 would have flown without driving me nuts first without a ton of help from some members...
View ArticleClik here to view.
Twinn Rexx Chinook for sale
I'm selling my Twinn Rexx Chinook RTF. This is a great helicopter for someone who's looking for something different! Although it's easy to fly, I wouldn't recommend it for beginners due to the more...
View ArticleArg, I hate breaking things while I'm fixing things
I have a decent amount of experience, 35+ years, with working on mechanical things. Whether it be repairing my MX bikes, cars, trucks, rc cars, paintball markers, and now helis, I've had a pretty good...
View Article160HV error code?
After plugging the battery the ECS goes thru it's normal sequence of beeps. But right after, the ESC sounds off a constant 6 beep and flash pattern. What does this mean? The last thing I did before...
View ArticleHello, new and already got ?'s, LOL
Creole here from Louisiana. we've always played around my house with RC helos. Mostly cheap ones from walmart or walgreens. Got a little bolder and bought my son a Viefly Dura V10 with the lights for...
View Articlemain motor, 3n1 or servos problem?
I am on my second mcpx and it is starting to behave like my first one. After 50++ flights it started to yaw to the left when go to full pitch. Since I had this with my first mcpX I assumed it was...
View Article