Logo 600 3D My First FBL Set Up
Having flown nitro heli's (stop the boooing) for a number of years I recently took the plunge into electric flybarless. Found a nice and gently used Logo, with a helicommand rigid set up, Kontronics...
View ArticleClik here to view.
My home made boom supports and frame fix.
Well, I have beat this poor frame to pieces. And I'm keepin' her running! Today's crash on the roof (inverted climbout led to the tail blowing out and before I could stop it it was on the roof). It...
View Article3 in 1 board diagram??????
wondering if anyone can help me locate a diagram of the mcpx 3-1 board with components labeled. im trying to diagnose an issue but cant figure out what anything is on the board.
View ArticleClik here to view.
SOLD MCPX Brushless parts
SOLD! Selling the following parts for MCPX Brushless convertion. - Heli Max Brushless ESC Selling for $15 and you get the two motors for free. - walkera brushless motors WK-WS-12-005 (pinion a little...
View ArticleBlue Dampener?
Right now my heli is down waiting on parts, and can't fly cause work right now. But I have a question about the BLUE dampeners. Why are the considered a upgrade? What all do the help out with, I've...
View Articlet rex 500cf parts package
all metal head with paddles, 3 main shafts 3 spare flybars.. tail boom compleat assy, belt drive, includes front block, plastic blade holders and control arm. 1 spare tail shaft and 1 spare belt. $100...
View ArticleHello from San Diego, CA
Hi all! I've been flying Syma's since last August, and got frustrated that they could fly right. I wanted to slide left & right and they wouldn't. :lol: So, after much reading, I got a mCX2 / DX6i...
View ArticleMotor pod slipped off end of boom
How do slip the motor pod back on the end of a boom/arm? It doesn't seem to want to go and I don't want to break anything.
View ArticleBlade 450 beastx feeler thread
Hi guys, I'm about to pic up a trex 500 and no longer need this bird. It has every single upgrade from blade (carbon tail booms all metal tail box, etc...) Align fbl head Beastx v3 Futaba 9257 on tail...
View ArticleRecommended DX6i setting
I had been flying my HBK2 w/ the stock 72mHz Tx. Since I got a mCPx for Christmas, I broke down and bought a DX6i. Now my question is this, can anyone give me a basic setup that I should use? Last time...
View ArticleESC / gyro channels?
Hi, I'm trying to change from VBar gov to CC gov. I set the governor to disabled in vbar, but now I get no signal to my ESC. In vbar setup > transmitter tab I see that my throttle stick and flight...
View ArticleMajor DX6i Disappointment
I started flying my mCPx on the stock DX4e Tx. I've heard over and over on here how it's a piece of crap and you should upgrade at least to a DX6i. About a month ago I finally upgraded and didn't...
View Articleif it is ok to use the throttle hold when working on your heli
The reason I and most heli pilots who advocate safety recomend this is simple. When a pilot uses the Thro hold as a method to shut down the motor while working on a heli, they become complacent after...
View ArticleSwinging Main Rotor
Total newbie here. Been messing around with the MSR and now moved to a Blade SR that I got on the cheap. My question is about the main rotor. Do you tighten the screws on the grips to keep the rotor...
View ArticleLooking for a Velocity 50 Flybar Head
Looking for a flybarred head for my velocity 50. Pm me.
View ArticleClik here to view.
Dewalt 36V a123 Packs
These are NIP; but, voltages are a bit low, possibly from sitting, and may indicate a low/bad cell (typically 32.8-33V at rest). Voltages read off my Watts-Up meter: 200621 = 32.2V 200635 = 28.93V I...
View ArticleI need some advice
What would be a good choice for a CP heli? I'm thinking nothing smaller than a 500 because I'm looking at something that will handle windy Oklahoma days. There are so many options out there, all I'm...
View Articlebest fbl head and system combo?
Need opinions for the best fbl conversion for my trex 500. What head and system are you guys using? Also how much can I expect to spend for this upgrade? Happy landings! Troy:fly:peace
View ArticleCPII pitch adjust
So my heli is driving backwards a lot, i know the pitch is where to change this, but in what direction? + or -?
View Article