Scorpion-6 headspeed please help!
I am using the 60 amp commander esc v 3 with the sco. -6 motor with an 11t pinion. What should i be governing my esc at to get 3000 headspeed?
View ArticleGyro position
In my (very) limited experience, I have seen only helicopters with gyros mounted aft, over the boom mount. Then along comes this titan x50 build and it says to mount the gyro fore, in the tray over the...
View ArticleClik here to view.
Gens Ace 6s 5300 mah batteries 3 cycles four available
I have four gens ace 6s 5300 mah 30c batteries for sale. Each battery has only 3 cycles and are like brand new with deans connectors installed I just received these batteries Thursday last week and...
View Articleshould blade make a shaft tail for the blade 450?
the blade 450 is an awesome heli amirite? but there's always that one guy who will not touch a heli unless its a torque tube. how hard could it be for e-flite or any third party company to just make a...
View ArticleSR120,Blade 450,Dx6i,Phoenix Sim! 650 + shipping
I have a Blade 120,450 dx6 and the phoenix sim. I have 3 batteries for the 120 and 2 for the 450. Also included is the dx6 that comes with the 450 RTF,chargers and all my spare parts. The 120 needs a...
View ArticleTail Cone?
Any thoughts on adding a cover for the tail boom? I've seen full none-scale fuselages for 450's like one from Esky. But what about one for the MCPX? I was looking at mine with the Xtreme canopy on it,...
View ArticleSome newb questions after tons of reading...
Hey all! Just registered here, forums are always part of the hobby. I own for a month an mcpx with dx6i (which i got bored easily) and for a year or so an e-revo brushless. Being active on the traxxas...
View ArticleWhat do you think of the new Spring/Summer Blade models?
I'm stoked, and yet at the same time... disappointed. I've been dropping hint after hint to the wife that I'd like a Blade 300X for Father's day. Do you think hanging a picture of one up on the den...
View ArticlePrinting setups
Hello, Is there a way to print SK720 setups directly or through pdf like we can print setups of the Castle ESC setups? Best, Loic
View ArticleWalkera 22e, Exceed eagle 50
Does anyone know of a good main rotor shaft and gear upgrade for this model? The set screw for the main rotor shaft, at the bottom, keeps getting stripped really bad and will never hold. I have the CNC...
View ArticleT-Rex 500 ESP
I am getting out of the hobby and i am selling my T-REX 500,DX7 and a lot of parts.i Have it on ebay.whoever is interested can click on the link.thanks...
View Article3 new mcpx celctica chargers
brand new chargers that came with mcpx kits cords still have oiriginal tie wrap////will throw in 2 never chrged/.or used stock batterys too ,,,,make offer
View ArticleFS: 3 Align 410m cyclic and 1 DS520 tail servo
I have for sale 3 almost brand new align 410m cyclic servos and 1 DS520 tail servo. The electronics came from my new align 450 3gx with only 3 setup flights however I just received a set of MKS servos...
View Articletrade some nitro airplanes for what you got?
i have some nitro airplanes sig kadet 40 kit built myself rtf minus tx/rx http://a1.sphotos.ak.fbcdn.net/hphot..._5909933_n.jpg katana v2 70 with k&b .61 engine also ready to fly trade one for an...
View ArticleFirst Outdoor Trex 450 Flight
Trex Flight #19) 2/7/12 11 AM First Outdoor Flight for Trex 450! After a couple of weeks of flying in the basement garage during winter weather, we had a calm day outside of Buffalo, NY. Only 34...
View ArticleStupid DX8 Wasted 4hrs
I replaced the BEC in the heli. When I power up the Heli with 0 pitch? the swash stay level. But once outside of 0 pitch? the Aileron tilts to the right very slowly. Check everything. redo the Beastx...
View ArticleMotor mount and CB
What bolt pattern does the stock CB accommodate? I see on Jan's site there is an optional CB but it doesnt give any details...is the stock 25mm and the optional 30mm?
View ArticleClik here to view.
First hover, first crash
Well, went out and went for it today. Logged probably 15 hours on the sim between friday and today and was getting comfortable with hovering tail in and side in. Decided the heck with it, I need some...
View ArticleClik here to view.
Blade SR -- PARTS GALORE (motor, ESC, gyro, servo's and misc.)
For Sale: BLADE SR grab bag of parts!!! 1) used - stock E-flight 3900kv motor (part # EFLH1516) 2) used - stock E-flight brushless ESC (part # EFLA308H) 3) used - E-flite G110 Heading Lock Gyro (part #...
View ArticleKontronik Koratop 30-12
Hi guys, does anybody know if this motor wil fit in the TDR. I don't seem to find any info about this motor. It's not the PYRO 30-12 but the KORATOP 30-12. Does anyone know how many KV this motor has...
View Article