extra screws
Hi Did any one get some 2. mm*12 (4pcs) extra screws. I have 4 and am not sure what I missed. Any one has any Ideas what they might be for? Kindly let me know please. I believe they came from bag #8...
View Articlebeastx best place to install
where is the best place to mount the beastx on my 500 I had a 3G on this heli now the beast . can I mount on my gyro tray? on tray it would have to be mounted upside down so I can get to adj. pots ,...
View Article70ahv - hot scorpion 4025-550
Have a hobbywing 70ahv on my Fusion 50 with a Scorpion 4025 550 I was running the stock settings of 12khz and 15* and the motor was REALLY hot Moved it down to 8khz and 7.5* and the esc is only very...
View ArticleHead dampners
I finally had to replace my original feathering shaft in my V1. I already had a spare feather shaft kit. After removing my grips and feathering shaft, I examined the replacement feathering shaft parts....
View ArticleOS 55 HZ + Funtech Priced to Sell
Got a used OS 55 hz and Funtech B320 pipe, bearings still looks good still has original glow plug in it. $150 shipped for both. Can ship tomorrow.
View ArticleClik here to view.
Accucel 8 Charger
Up for sale is a used Turnigy Accucel 8 charger in good working condition. Just upgraded my charging station and this needs a new home. The only problem with this charger are the four buttons. I...
View ArticleLipo for 250
Hello, I have a trex 250 with the 3g FBL system and I wanted to upsize my battery collection so that i can take it anywhere and have a lot of flying without needing to take the charger. I currently...
View ArticleESC cutting out?
I had originally mounted my ESC just under the battery tray between the frames, but after doing some final dial in's today with some sport flying (first time since more than just hovering), the ESC...
View Article3 in 1 issues?
Hey guys, Had a small crash today, nothing out of the ordinary. Heli won't bind (dx6i).. I get a solid blue light when I plug in the lipo then it goes out *normal to this point* but it never comes back...
View ArticleClik here to view.
Hacker A40-10S 1600kv
Up for sale is a used Hacker A40-10S 1600kv outrunner motor. Motor and bearings are in good working condition and the leads have been shortened. As you can see in the pictures the can has a few grooves...
View ArticleGovernor Setup help
im brand new at nitro helis, my trex 700 is all put together and ready for its first start. but im not sure how im supossed to set up the governor in my dx8 or even if i need it on when i start the...
View ArticleCyclic Response (Airleron) ?
Hi guys, Had my first real flights on my BeastX with my old TREX600 Helifreak Xteme Edition. Still one of my favorite helis. I pretty much did the stock setup and it flew great with virtually no...
View ArticleTo rotopod or not to rotopod
I've been thinking about training wheels for.my trex500 but I've never seen the rotopod is it. For.larger heli's or would a 500 fit it good i.know it says 30size and people use 50's on them but would a...
View ArticleFBL conversion???
the protos 500 will be my next heli and there is no question, i will want it to be FBL. After shopping online for the kit i noticed they all come flybarred. Is it as simple as adding the 40 dollar FBL...
View ArticleDFC with 550 Blades? Nope!
Oops. :arggg: I maidened my 550 with 550 blades, 86mm tail today. Not good. Tail strike on the very first flip. So if you want to run the DFC head, stick with the 520 blades. :face
View ArticleClik here to view.
HK500GT in a MD500D Fuselage
About 75% complete. Have to work on the CG...a little tail heavy...Still have to figure our a paint scheme, install nav and strobe lights, and windows. Then someday, install a 5-blade rotor. The only...
View Articlemcpx v1 not binding just flashing (fixed)
my mcpx had been slowly dying, it started doing lvc cut off's mid flight, on bind the light would flicker on then off. Then i would have to rebind. I tried repairing the battery cable next to the...
View ArticleClik here to view.
My Turnigy Sky Tach
So I got the turnigy tach, and I put a 9v in it. It spins up way too fast at the start, then slows down too far, and then kind of settles down where it's supposed to be. It takes a few seconds before...
View ArticleWill ALIGN 325 CF blades work on the B450?
I have a brand new set of ALIGN 450 325 CF blades laying around and i was going to buy BLADE CF blades. But since they both need to be shimed, I figure they are the same thing. For those who are useing...
View Article